POWER/SITE PREPARATION

QUICKFACTS

The standard Tormach PCNC mill configuration provides an AC switched outlet at the bottom of the control cabinet which can be operated either under manual control from the console or via automatic control using the M codes (M7, M8, M9). That control circuit is limited to very low current devices.

• This External Contactor Kit allows for the safe use of these M Codes to control devices.
• Coil Voltage: 120 VAC.
• 3 Pole AC Contactor for breaking/closing 50/60 Hz AC circuit.
• Usage Categories: AC1, AC3, AC4.
• Rated Operational Current: 95A (AC3 Usage @ 380VAC).
• Beware of inductive devices such as pneumatic valves, electrical motors, etc., as they can introduce machine control problems. An optional Noise Suppression Kit (PN 33059) is available and will resolve many common electrical noise issues.
• Kit, some basic assembly and machining is required.
  
  
  Price: $105.00